Kaniwaba Electronic Power Pedal Kit V4


With this pedal kit, you may change between pedals or pegs without installing the kit. The new and improved version 4 pedal kit is now compatible with all Surron and Segway models.


Get Financing Today with:


What YOU get:

  • Strong. Left and right side brackets are made of a single piece to stand drops and tough conditions!
  • This pedal kit WILL propel your ebike both mechanically and electronically.  You get a carefully designed split sprocket to install on the jackshaft WITHOUT UNINSTALLING IT, a high quality freewheel with hub, a 34 link bicycle chain with master link so you can easily install on uninstall, a 3 position sensor, a controller, and a cadence sensor!
  • Cadence sensor to detect pedal speed.
  • Three Position Handlebar Switch: Throttle only, pedals only or both (greater speed between pedals and throttle), the system will compare and transmit to the controller the higher speed.
  • Compatible with chain or belt drives
  • NEW! Allows chain tension adjustment
  • A pedal kit that lets your rear suspension WORK. The original pedal kit is located directly on the rear swingarm, therefore it does not spring your weight… you will feel the difference immediately going over obstacles, plus the turning is greatly improved!
  • Compatible with chain or belt drives
  • Chain guard must be removed
  • Plug and Play pedal kit fixed to the frame! You just disassemble the existing side brackets and install the pedal kit.
  • Easy setup.  Adjust the kit to your bike using the stainless steel collars.  You may easily change between pedals or footpegs (and you have two footpeg positions!).  Just install the footpegs or the cranks without removing the pedal kit, you can also remove the spindle. You choose!
  • Maintenance free.  New design is maintenance free since it has sealed cartridge bearings.
  • Brace bar.  Also works as a brace bar
  • Reduced wobble.  Little to no wobble of the chain and improved in this V3.0, since it is not connected to the main drive chain, a common problem with the OEM kit.
  • Cranksets compatible. This kit is compatible with JIS square tapered cranksets, no major crank offset is required. If the crank has no offset, the maximum compatible length is 160mm. OEM Crankset is compatible.
  • Aluminium made in order to reduce weight.  With a weight of around 4.3 Lb (2.0 kg).  The spindle is made of stainless steel.
  • Durable Materials. Parts made of aluminum and stainless steel.  It will last a long time.
  • OEM Look.  Discrete installation, all cables hidden!
  • Propels the bike using the bike’s battery.
  • Speeds Table

    Switch Position Max Speed in EP* Max Speed in SPORT*
    0 – Original Speed US:  31 mph

    CA:  50 km/h

    EU:  50 km/h

    AU:  50 km/h

    US: 53 mph

    CA: 85 km/h

    EU: 85 km/h

    AU: 85 km/h

    1 and 2 US Law: 20 mph

    CA Law: 32 km/h

    EU Law: 25 km/h

    AU Law: 25 km/h

    US:  36 mph

    CA:  65 km/h

    EU:  54 km/h

    AU:  54 km/h